Installation Check List - Manitowoc SM Installation Use And Care Manual

Installation Instructions

Installation Check List

Is the Ice Machine level?
Has all of the internal packing been
removed?
Have all of the electrical and water
connections been made?
Has the supply voltage been tested and
checked against the rating on the nameplate?
Is there proper clearance around the ice
machine for air circulation?
Is the ice machine grounded and polarity
correct?
Has the ice machine been installed where
ambient temperatures will remain in the
range of 50° - 110°F (10° - 43.3°C)?
Has the ice machine been installed where the
incoming water temperature will remain in the
range of 35° - 90°F (1.6° - 32.2°C)?
NOTE: If air temperature is less than 60°F (15.5°C), water temperature must be equal to or greater than 50°F (10°C).
2-10
Is the ice machine drain line routed to an
open site drain?
Are all electrical leads free from contact with
refrigeration lines and moving equipment?
Has the owner/operator been instructed
regarding maintenance and the use of
Manitowoc Cleaner and Sanitizer?
Has the OWNER WARRANTY
REGISTRATION CARD been completed?
Has the ice machine and bin been sanitized?
When installed is the drain pump functioning
correctly energizes, de-energizes and safety
switch stops the ice machine?
GFCI Required - Is it a breaker type and not a
receptacle type?
Is the ice machine plugged into a properly
grounded, polarized receptacle?
Have the water and drain connections been
examined for leaks?
Part Number 000001590
Section 2