Appendix; Caring For Your Telephone; Contact With Liquid - Siemens Gigaset S790 Manual

Hide thumbs Also See for Gigaset S790:
Table of Contents

Advertisement

Gigaset S795 only:
No time is specified for a message in the call list.
¥
Date and time have not been set.
Set the date and time (
The answering machine announces "PIN is
incorrect" during remote operation.
¥
1. You have entered the wrong system PIN.
Enter the system PIN again.
¥
2. The system PIN is still set to 0000.
¢
Set the system PIN to something other
than 0000 (
page 58).
The answering machine is not recording any
messages/has switched over to answer only.
¥
Its memory is full.
¥
Delete old messages.
Play back new messages and delete.
Exclusion of liability
Some displays may contain pixels (picture
elements), which remain activated or
deactivated. As a pixel is made up of three
sub-pixels (red, green, blue), it is possible
that pixel colours may vary.
This is completely normal and does not
indicate an error.
¢
page 15).

Appendix

Caring for your telephone

¤
Wipe the device with a damp cloth or an
antistatic cloth. Do not use solvent or a
microfiber cloth.
¤
Impairments in the high-gloss finish can
be carefully removed using display pol-
ishes for mobile phones.
Never use a dry cloth as this can cause static.

Contact with liquid

If the device comes into contact with liquid:
1. Unplug the power supply and/or re-
move the battery from the handset im-
mediately.
2. Allow the liquid to drain from the device.
3. Pat all parts dry. Place the device (hand-
set with the battery compartment open
and the keypad facing down) in a dry,
warm place for at least 72 hours (not in
a microwave, oven etc.).
4. Do not switch on the device again until
it is completely dry.
When it has fully dried out, you will normally
be able to use it again.
Appendix
!
61

Advertisement

Table of Contents
loading

Table of Contents