Table of Contents
Advertisement
Method 1: From Windows Mobile
Tap Start → BootMode.
1.
The BootMode Screen appears.
2.
Tap Cold Boot.
The sy stem is reset and you will lose all data
including all files in the RAM memory.
Method 2: From Hardware
1.
Remove the battery compartment cover and the main battery. See the
section of Installing the Battery.
2.
Turn the backup battery switch off.
3.
Turn the backup battery switch on.
4.
Put the battery back into the battery
compartment and replace the battery
compartment cover.
System will cold boot.
NOTE: When you perform hard reset, the data an
time settings will not be retained. Formats,
preferences, and other settings are
restored to their default factory settings.
24
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
d
Advertisement
Table of Contents
