Table of Contents
Advertisement
1.
Turn on your device by pressing the Power button
NOTE:
The PA500II screen ships with a protective plastic film. You may
remove it by peeling from one corner. The screen will be more
susceptible to scratching without the film, but will be more reada
The unitec
h PA500II welcome screen appears. The Windows Mobile
screen will appear shortly.
2.
Calibrate the PA500II
The calibrate screen w
powered-on for the first time or after the system is reset. This sc
also be accessed at any time by tapping Start → Settings → System tab
→ Screen.
The PA500II
will prompt you to calibrate the unit by tapping a sequence of
screen locations. Tap gently but firmly. When you have completed the
series of taps, press the Enter button to confirm it.
3.
Set the Time Zone, Date, and Time
Select your current time zone from t
then tap Next.
4.
Follow all onscr
een instructions to complete the set up. The setup wizard
provides tips for using the pop-up menus and assign a lock password to
access your device.
After the device setup
synchronize information between your computer and your device. Se
Establishing Device-PC Connection in chapter 3 for detailed instruction
8
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
ill automatically appear when the unit is
he Time zone drop-down menu, and
, you can create an ActiveSync partnership to
on the front panel.
ble.
reen can
e
s.
Advertisement
Table of Contents
