Advanced Settings; Performing A Hardware Reset; Performing A Warm Boot; Performing A Cold Boot - Unitech PA500II User Manual

Enterprise mobile computer

Hide thumbs Also See for PA500II:

Table of Contents

You may have to perform a reset if the device freezes (i.e., the device no

longer responds to the buttons or tapping on the screen).

A soft reset allows your device to get a fresh start, similar to rebooting a

computer.

This will restart your device and adjust memory allocation. All records and

entries are retained after a soft reset. Unsaved data in open programs may be

lost.

Remove the stylus from its holder.

Lightly press the tip of the stylus to the reset button located at the rear side

of the terminal.

A cold boot will erase all data and all programs you have added, and will

restore the device to the default factory settings.

Never perform a cold boot unless a warm boot does not correct your problem.

When you perform your next ActiveSync operation, you can restore any data

that you previously synchronized to your computer or you can restore data that

you backed up to a storage card.

vanced Setting

Chapter 5

Reset button

Table of Contents