Powering On The Pa500Ii - Unitech PA500II User Manual

Enterprise mobile computer

Hide thumbs Also See for PA500II:

Table of Contents

To charge the device using the docking station:

Plug the AC adapter cable into the power jack on the docking station.

Plug the AC adapter into an electrical outlet.

Slide the device into the docking station until it clicks into place.

The connection is secure when the bottom edge of the device is aligned

smoothly with the docking station, and the LED indicator on the docking s

and device lights up red.

LED status during chargin

– Solid red: Charging

– Solid green: Chargin

If the battery level becomes low, a

indicating low

or very low battery

ActiveSync ope tion to back up your ata, and then recharge your device a

soon as possible. If the battery level reaches a low status, the device will enter

a sleep mode and cannot be powered up until the battery is charged. Windows

Mobile 5.0 devices will retain installed applications and data when the main

battery is completely drained for extended periods of time.

Powering On the PA500II

After you have initially charged your device for about 16 hours, the device is

ready to be used. You can now start up your device where you can calibrate

the screen, set up the system time zone, and learn some basic stylus usage.

g complete

status icon appears on the device screen

status. In both cases, perform an

tation

Table of Contents