Step 1: Network Setup; Step 2: Raid Creation; Step 3: Create Local Users Or Setup Authentication; Step 4: Create Folders And Set Up Acls - Thecus N7700SAS User Manual

Chapter 4: Web Administration

Step 1: Network Setup

From the Web Administration Interface, you can configure the network settings of
the N7700SAS for your network. You can access the Network menu from the menu
bar.
For details on how to configure your network settings, refer to
Chapter 4: System Network

Step 2: RAID Creation

Next, administrators can configure their preferred RAID setting and build their RAID
volume. You can access RAID settings from the menu bar of the Web Administration
Interface by navigating to Storage Management > RAID Configuration.
For more information on configuring RAID, see
Chapter 4: System Management >
Don't know which RAID level to use? Find out more about the different RAID levels
from Appendix C: RAID

Step 3: Create Local Users or Setup Authentication

Once the RAID is ready, you can begin to create local users for the N7700SAS, or
choose to setup authentication protocols such as Active Directory (AD).
For more on managing users, go to Chapter
For more information on configuring Active Directory, see
Chapter 4: User and Group Authentication >
For information about the benefits of Active Directory, see
Directory Basics.

Step 4: Create Folders and Set Up ACLs

Once users are introduced into your network, you can begin to create various folders
on the N7700SAS and control user access to each using Folder Access Control Lists.
More information on managing folders, see
Chapter 4: Storage Management >
To find out about configuring Folder Access Control Lists, see Chapter 4: Storage
Management > Share Folder>

Step 5: Start Services

Finally, you can start to setup the different services of the N7700SAS for the users
on your network. You can find out more about each of these services by clicking
below:
SMB/CIFS
Apple File Protocol (AFP)
Network File System (NFS)
File Transfer Protocol (FTP)
Interface.
.
RAID
Basics.
Share Folder
Folder Access Control List
21
Configuration.
4:User and Group Authentication.
ADS/NT Support.
Appendix D: Active
.
(ACL).