Optional Items - Takagi T‐KJr2‐IN Installation Manual And Owner's Manual

Model T‐KJr2‐IN
✔
TK‐RE02
TM‐RE30
✔
TK‐BF01
✔
TK‐TV10
TK‐PC01
✔
TK‐PCJr2
TK‐RB02
TK‐KPWL4
✔
TK‐KPWH4
✔
TK‐KPCT43
1. Temperature Remote Controller: TK‐RE02
The
Controller has two functions. It
allows the output temperature
from the water heater to be
adjusted within the range of
99 °F to 167 °F, and it also
works as a diagnostic tool that will give a concise
error code whenever there is a problem with the
unit. The temperature options are 99°F, 100°F,
102°F, 104°F, 106°F, 108°F, 109°F, 111°F, 113°F,
115°F, 117°F, 122°F, 131°F, 140°F, 158°F, and
167°F. See the trouble shooting section for
information on possible error codes.
3. Backflow Preventer: TK‐BF01
The Backflow preventer prevents
the backflow of air through the
exhaust vent. This helps prevent
harmful exhaust gases from
entering the home, as well as
helping to prevent the unit from freezing in areas
where cold air can be blown or drawn into the
exhaust system. Install this vent damper in
accordance with the installation instructions and
any applicable codes.
OPTIONAL ITEMS
T‐KJr2‐OS T‐K4‐IN
✔
✔
✔
Temperature Remote
9
│
T‐K4‐OS
✔ ✔
✔
✔
✔ ✔
✔
✔
✔
2. Temperature Remote Controller: TM‐RE30
The
Controller has two functions. It
allows the output temperature
from the water heater to be
adjusted within the range of 99
°F to 185 °F, and it also works as
a diagnostic tool that will give a concise error code
whenever there is a problem with the unit. The
temperature options are 99°F, 100°F, 102°F,
104°F, 106°F, 108°F, 110°F, 111°F, 113°F, 115°F,
117°F, 122°F, 131°F, 140°F, 149°F, 158°F, 167°F,
176°F and 185°F. See the trouble shooting section
for information on possible error codes.
4. Direct‐Vent Conversion Kit: TK‐TV10
conversion kit in accordance with the installation
instructions and any applicable codes.
Page
Installation
T‐D2‐IN T‐D2‐OS
✔ ✔
✔
✔
✔ ✔
✔
✔
✔
Temperature Remote
This kit can be used to
convert the water
heater from a
standard vent system
to a direct‐vent (or
sealed combustion)
system. Install this