TATA Motors Indica V2 Owner's Manual & Service Book page 32

BEFORE DRIVING
The 'SET' knob is used to control the chosen function. Pressing
the knob for a few seconds resets the chosen tripmeter and
varies the intensity level of instrument panel illumination.
The panel illumination intensity varies among preset levels as
follows :
= Min
= = = = Max
This display returns to Trip A after a few seconds of intensity
level selection, if left in this mode.
Note : Main odometer and tripmeter A indication will
remain on display even if the ignition key is removed.
Reduced contrast in display may occur at low and high
temperature.
RPM meter :
The meter indicates engine speed in revolutions per minute
(rpm)
Change gears at appropriate engine rpm and car speed to get
optimum fuel economy.
The permitted engine rpm upper limit is the start of Red Zone
on the dial.
If RPM meter does not indicate during initial cold starting,
gently raise the engine rpm till the battery charge lamp goes
'OFF'.
Gauges
Intensity Level Indicator
RPM Meter
31