TATA Motors Indica V2 Owner's Manual & Service Book page 27

BEFORE DRIVING
Turn Signal and Hazard Warning
I) Turn Signal :
Turn signal lamps can be operated only when the ignition supply
is 'ON and by using the turn indicator switch on the combiswitch.
The direction indicator
cluster flashes alongwith external indicator lights as selected.
II) Hazard Warning :
This can be operated without ignition 'ON'. Press the hazard
warning switch (red knob) on the centre of the dash board, all side
indicator lights and indicator
cluster will flash simultaneously to warn the other road users about
any hazardous condition of the car. Depress the knob again to
switch 'OFF' the hazard function.
Note : If light does not blink or blinks rapidly, it is an indication of
problem in the blinker electrical system or the indicator bulb at front
or rear has fused. Get it rectified immediately.
26
(LHS) and (RHS) on the instrument
, LHS and RHS turn indicators on
Instrument Panel
Hazard Warning Switch