TATA Motors Indica V2 Owner's Manual & Service Book page 106

MAINTENANCE & CAR CARE
Ensure that balancing weights are not disturbed during removal of
tyres.
Check the balance weight prior to the removal of the tyre. If found
loose, mark its location on the rim & refit properly.
Balance the wheel after every dismantling and assembly of tyre on
the wheel rim.
While fitting wheels on the car ensure that wheel pins are free from
dust, scratches, dirt, dents, etc.
Ensure the tube being replaced has the correct valve.
Do not apply any oil on the wheel pins. Wipe off the oil if
present.
For replacement of the decorative wheel cover, remove only 3 wheel
pins. The 4th wheel pin, where the hole on the cover is larger need not
be removed to remove the cover.
Wheels & Tyres
105