Automatic Defrost Function
Checking the current setting of the automatic defrost function
1.
Press and hold the command button on the
transmitter, then holding the stop button.
STOP
BUTTON
2.
In less than 5 seconds, the transmitter display
shows the entire screen.
24
3.
After 5 seconds, a beep sounds and the current
status displays.
COMMAND
BUTTON
7336040T
NOTE: Please pay attention because the setting
7302010T
Automatic
Blinking
defrost
function ON
Automatic
Blinking
defrost
function OFF
changes when more than 10 seconds pass after
pushing the command button and the stop button
on the transmitter.
7302161T