Setting the automatic defrost function from OFF to ON
1.
Press and hold the command button on the
transmitter, then holding the stop button.
STOP
BUTTON
2.
In less than 5 seconds, the transmitter display
shows the entire screen.
3.
After 5 seconds, a beep sounds and the current
status displays.
COMMAND
BUTTON
7336040T
4.
After 10 seconds, the screen will switch and short
beeps are sounded.
7302010T
Automatic Defrost Function
Blinking
Indicates a current setting status
ON
Indicates that the automatic
defrost function is activated
7302141T
7302151T
23