How To Program An Additonal Transmitter - Honda 08E91-E22-100B Installation Instructions Manual
2006 civic 2-door; 2007 civic 2-door; 2008 civic 2-door
Hide thumbs
Also See for 08E91-E22-100B:
- Installation instructions manual (21 pages) ,
- Installation instructions manual (21 pages) ,
- Installation instructions manual (20 pages)
Table of Contents
Advertisement
How to Program an Additonal Transmitter
1.
Connect the HDS to the data link connector.
2.
Start the HDS and click on the car icon.
3.
Input the vehicle's VIN and other required
information.
4.
Select Honda Systems.
5.
Select R/C Engine Starter.
6.
Select REGISTER NEW TRANSMITTER.
7.
When "Ready to program the new transmitter"
shows, select ENTER.
8.
Press and release the Command button.
9.
Press and release the Stop button.
10. Perform the function check on both transmitters.
NOTE: Only 2 remotes can be stored in the
system's memory.
22 of 22
www.collegehillshonda.com
AII 38215-38958 (0802)
© 2008 American Honda Motor Co., Inc. - All Rights Reserved.
Advertisement
Table of Contents
