Honda 08E91-E22-100B Installation Instructions Manual page 12

37. Unplug the brown vehicle 7-pin connector, and
plug the brown engine starter harness 7-pin
connector into the brown vehicle 7-pin connector.
NOTICE Make sure that the engine starter harness
7-pin connector (brown) is connected to the vehicle
connector and it is locked securely. A loosely
connected connector can cause engine stall during
driving.
ENGINE STARTER
HARNESS 7-PIN
CONNECTOR (brown)
Pull the connector and
check that it is locked
securely.
12 of 22
www.collegehillshonda.com
VEHICLE 7-PIN
CONNECTOR (brown)
(Not reconnected.)
6D01091T
38. Disconnect the vehicle 8-pin connector on the rear
of the wiper switch and plug the engine starter
harness 8-pin connectors into the vehicle 8-pin
connector.
39. Secure the connected 8-pin connector with a wire
tie to the engine starter harness.
AII 38215-38958 (0802)
ENGINE STARTER
HARNESS
VEHICLE 8-PIN
8-PIN CONNECTOR
CONNECTOR
WIPER
SWITCH
CONNECTED 8-PIN
CONNECTOR
WIRE TIE
WIPER
SWITCH
© 2008 American Honda Motor Co., Inc. - All Rights Reserved.
6D01101T
ENGINE
STARTER
HARNESS
6D01071T