Transmitter Battery Replacement - Honda Remote Engine Start System II User's Information Manual

Transmitter Battery Replacement

1. Touch your hands to any metal part of the vehicle to
discharge any static electricity.
2. Remove the battery cover.
3. Remove the old battery.
4. Install new lithium battery (CR2032) into the
transmitter with the positive (+) mark toward the
battery cover.
5. Install the battery cover.
6. Push the lock button on the transmitter. The buzzer
should sound indicating that the battery is installed
properly.
Instructions:
Perchlorate material special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
32
BATTERY
COVER
LITHIUM BATTERY
CR2032
SOFT CLOTH
SMALL FLAT-TIP
SCREWDRIVER
© 2012 American Honda Motor Co., Inc. - All Rights Reserved.
Discharge any
static electricity.
COIN
SOFT CLOTH
B127751H