TC Electronic G-Force User Manual page 41

THE BLOCKS
Note 2 - 8
Use these parameters to specify the notes you want in your
Custom scale. You can only specify the number notes set by
the "Notes Used" parameter. The Custom scale must be
described within an octave.
Fixed 1 & 2 Voice Pitch
Voice 1-2
Sets the amount of pitch on each of the two voices.
Maximum pitch is +/- 12 semitones.
Delay 1-2
Sets the Delay of the each of the two voices. Maximum
delay time per voice is 400 ms.
Level 1-2
Sets the level of the two pitch voices.
Pan Position 1-2
Controls the panning of each of the two pitch voices.
Feedback 1-2
Sets the amount of Feedback on the two voices. This can
create really weird effects since the signal will be pitched
over and over meaning that it will rise/fall more and more
over a period of time.
Mix
Mix between direct sound and effect.
In Level
Controls the input level of the block.
Out Level
Controls the output level of the Pitch block.
Mute mode
See Mute mode in the introduction of this chapter
Detune
Voice 1-2
Sets the amount of pitch on each of the two voices.
Maximum pitch is +/- 50 cents.
Delay 1-2
Sets the Delay of the each of the two voices. Maximum
delay time per voice is 400 ms.
Pan Position 1-2
Controls the panning of each of the two detune voices.
Level 1-2
Sets the level of the two detune voices.
Mix
Mix between direct sound and effect.
In Level
Controls the input level of the block.
Out Level
Controls the output level of the Pitch block.
Mute mode
See Mute mode in the introduction of this chapter.
Delay
The Delay block has five different sub-algorithms: Stereo,
Dual, Dual Two-tap, One-tap and Quad-tap.
Effect Spillover from one preset to another can be obtained
by using the same sub-algorithm, and combination of Mute
mode = "Fx In" and bypassing the current block.
Example: If you want to leave a Delay tail hanging over a
preset change, make sure to keep the same sub-algorithm in
both presets. In addition to that you should select the "Fx In"
Mute mode and just bypass the Delay block in the second
preset.
Changing parameters like the Feedback or Mix over a preset
change can kill the Delay.
Stereo Delay
STEREO DELAY
Time
Sets the delay time of both Left and Right channel.
Maximum delay time is 740 ms.
Tempo
The Tempo parameter sets the relationship to the global
Tempo e.g. if you set it to 1/4T you will get quarter note
triplets of the tapped tempo. 1/4 equals the BPM (tapped
Tempo).
If you select "Ignored" the current parameter will use the
Preset value and will not be affected by the Global Tempo.
Feedback
Adjusts the Feedback of both Left and Right channels.
39