Recall - TC Electronic G-Force User Manual

RECALL

The Recall Display
The Recall display of the G-Force contains three parameters: Select - Bank - Preset.
Change cursor location by dialing the Parameter wheel. Use the Value wheel to adjust values.
Select
Is used to point to a certain block that you want to recall alone. Should be set to "All" when you want to recall a complete preset.
Bank
Is used to select which bank you would like to recall from, ROM (factory presets), User, or Card (only available when a pc-card is
inserted).
Preset
Dial the Value wheel to preview the presets.
Select which blocks will be
loaded from new preset
Preset number
Preset name
ROM/USER/CARD bank selector
Recalling a preset
When you want to Recall a preset, simply use the
Value wheel to scroll through the presets and press
the Enter button to Recall.
17