Table of Contents
Advertisement
- Close the door to continue defrosting.
- After defrost time, stand covered with aluminum foil for 5-15 minutes.
Minced Beef
- Place frozen minced beef on a shallow dish. Shield edges.
- turn over the food in the middle course. Remove defrosted portions, turn over and shield edges with
foil strips.
- Close the door to continue defrosting.
- After defrost time, stand covered with aluminum foil for 5-15 minutes.
Roast Meat (Beef/pork/lamb)
- Shield the edges with foil strips.
- Place joint with lean side face upwards (if possible) on a shallow dish.
- turn over the food in the middle course. And then shield the defrosted portions.
- Close the door to continue defrosting.
- After defrost time, stand covered with aluminum foil for 10-30 minutes.
Poultry
- Remove from original wrapper. Shield wing and leg tips with foil.
- Place breast side down on a shallow dish.
- turn over the food in the middle course. And then shield the defrosted portions.
- Close the door to continue defrosting.
- After defrost time, stand covered with aluminium foil for 15-30 minutes.
Note: After standing run under cold water to remove giblets if necessary.
Chicken pieces ( chicken wings and drumstick)
- shield the exposed bone with foil.
- Place chicken pieces on a shallow dish.
- turn over the food in the middle course. And then rearrange and shield the defrosted portions.
- Close the door to continue defrosting.
- After defrost time, stand covered with aluminum foil for 5-30 minutes.
Cleaning & Maintenance
The oven should be cleaned regularly and any food deposits removed.
Disconnect the power supply cord before cleaning. And if possible leave the door open to inactivate
the oven during cleaning.
Exterior:
The outside may be cleaned wipe with a soft and damp cloth. Avoid the use of harsh abrasive
cleaners.
Door:
Wipe the door and window on both sides, the door seals and adjacent parts frequently with a damp
cloth to remove any spills or spatters. Do not use abrasive cleaners.
Control panel:
Care should be taken in cleaning the control panel. Wipe the panel with a cloth dampened slightly. Do
not scrub or use any sort of chemical cleaners.
7
Advertisement
Table of Contents
