Related Manuals for Haier HDB-31100EGC
Summary of Contents for Haier HDB-31100EGC
- Page 1 HDB-31100EGC Please read this booklet carefully before fixing and using and save it for future reference.
-
Page 2: Operaiton Theory Of Microwave Oven
OPERAITON THEORY OF MICROWAVE OVEN 1.Microwave is a kind of high frequency electromagnetic wave, which is commonly distributed in the nature. But the existing form of microwave is dispersed so that it cannot be collected together for heating purpose. The key component of magnetron of microwave oven will transform the energy of electricity to microwave and huge energy of microwave field is established under the closed cavity. -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS The following basic precautions should always be followed when using electrical appliance: 1. Read all instructions before using. 2. Make sure the voltage in your living area corresponding to the one shown on the rating label of the appliance. -
Page 4: Product Introduction
child is able to use the oven in a safe way and understands the hazards of improper use. 16. When the appliance is operated in the combination mode, children should only use the oven under adult supervision due to the temperatures generated. 17. - Page 5 Waveguide cover Fig.1 Notes: 1. Door interlock ensures the oven can only be activated when the door is properly closed, which would prevent microwave radiation. 2. Control panel is illustrated in next page (the control panel is subject to change without prior notice). 3.
- Page 6 you input the cooking program and time. 2. Auto. Defrost / Temp. Time .Weight button You can select auto menu, cooking temperature and increase or decrease cooking time and weight by turnning Auto. Defrost /Temp. Time .Weight button. 3. Stop. Clear At the initial or input stage: press once to clear input programs and resume initial stage.
- Page 7 5) If you turn the food during operation, press the Instant. Start button once and the preset cooking procedure will continue. 6) If you intend to remove the food before the preset time, you must press Stop. Clear button once to clear the preset procedure to avoid unintended operation of next time use.
- Page 8 oven has been operated at 230℃, then you would like the oven to be operated at 180℃, in this case LED displays . You must reset the temperature or wait the oven to cool down. Err2 Notes: 1. The oven should not be used without the turntable in place, and the turntable should never be restricted otherwise it cannot rotate.
- Page 9 effect will be largely influenced. Auto cook table Display Category Direction Wash rice or pasta and soak for 30 minutes Place rice or pasta in a deep and large bowl. Refer to the water volume as follow. A c - 1 Rice 100g 200g 300g cover pasta 100g...
- Page 10 9. Auto defrost Turn Auto. Defrost/ button and the LED display will cycle to show Ad-1 Ad-2 Ad-3. Temp. Time .Weight Ad-1 --- for defrosting meat, the weight range from 0.1 to 2.0 kg. Ad-2 --- for defrosting poultry, the weight range from 0.2 to 3.0kg. Ad-3 --- for defrosting seafood, the weight range from 0.1 to 0.9kg.
- Page 11 10. Automatic starting (delayed function) If you do not want the menu be started immediately, you can preset the cooking menu and time, and the preset menu will be automatically started at your set time. The setting will consist of 2 steps: 1. Setting the current clock;...
-
Page 12: Microwave Cooking Tips
MICROWAVE COOKING TIPS 1) Arranging food Place thicker areas toward outside of dish and the thinner meat in the center and spread them evenly. Do not overlap if possible. 2) Cooking time Start cooking with the shorter period of time and extend it according to the actual need. Overcooking may result in smoking and burning.3) Cover foods before cooking refer to the recipe Use paper towels, microwave plastic wrap or a cover to cover food so that prevent spattering and help foods to cook evenly. - Page 13 Clean the oven at regular intervals Disconnect the power supply cord before cleaning. And if possible leave the door open to inactive the oven during cleaning. Exterior: The outside may be cleaned wipe with a soft and damp cloth .Avoid the use of harsh abrasive cleaners. Door: Wipe the door and window on both sides, the door seals and adjacent parts frequently with a damp cloth to remove any spills or spatters.
- Page 14 Note: 1. If LED displays Err0 during working ,it indicates that sensor has been short circuit and you need replace it at the nearest repaired department. 2.if LED displays Err1 during working ,it indicates that sensor has been open circuit and you need replace it at the nearest repaired department.