Frequency/Voltage Control - ECS 760GX-M Manual

Frequency/Voltage Control

This item enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by the kind of processor you have installed in your
system.
Auto Detect PCI Clk
Async SRC/ZCLK/AGP/PCI [100/133/66/33MHz]
Spread Spectrum
CPU Clock
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
Auto Detect PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free PCI slots.
Async SRC/ZCLK/AGP/PCI (100/133/66/33MHz)
This item enables or disables users to asychronously overclock the frequency of SRC/ZCLK/
AGP/PCI.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Clock(200MHz)
Use the CPU Host Clock to set the frontside bus frequency for the installed processor (The
default value is 200MHz; the frequency ranges from 200MHz to 255MHz).
Phoenix-AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
[Enabled]
Menu Level
[Enabled]
[200MHz]
F6:Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
Item Help
41