Honda WMP20X Owner's Manual page 39

MAINTENANCE
Fuel Filter
1. Drain the fuel into a
suitable container and
remove the gas tank.
2. Disconnect the fuel line, and unscrew the fuel filter from the
tank.
3. Clean the filter with nonflammable solvent, and check that
the filter screen is undamaged. Replace as necessary.
4. Clean the inside of the tank with nonflammable solvent and
dry thoroughly.
5. Place the o-ring on the filter and install the filter in the tank.
Tighten the filter to the specified torque.
Torque: 2 N'm ( 20 kg-cm, 17 in-lb)
6. Install the fuel line on the fuel filter and install the tank on the
engine.
7. After the tank is installed, add fuel and check for leaks.
O-RING
-
FUEL FILTER
33