Controls; Throttle Lever; Choke Lever; Fuel Valve - Honda WMP20X Owner's Manual

CONTROLS
Controls
You will use these controls every time you operate your
multi-purpose pump.
Throttle Lever
THRO'ITLE LEVER
I
The throttle lever controls
the engine speed. Moving
the throttle fully to the left
gives maximum engine
speed. Moving the throttle
lever fully to the right returns
the engine to idle speed.
The pump output can be
THROlTLE
controlled by adjusting the
throttle lever to the desired
position. At maximum throttle position, the pump will deliver
the highest output volume. Moving the throttle toward the
idle position will decrease the output volume of the pump.
Choke Lever
The choke is used to provide
CHoK: LEVER
an enriched mixture when
starting a cold engine. Move
the choke to the CLOSED
position when starting the
engine cold. If the engine is
warm, leave the choke in the
OPEN position.
Fuel Valve
CLOSED
The fuel valve is used to
stop flow of fuel from the
fuel tank to the carburetor.
The fuel valve must be in
the ON position to start and
operate the engine. Turn the
fuel valve to the OFF
position when the pump is
not in use.
FUEL VALVE
OFF
'
7