Honda Harmony HRB217TDA Owner's Manual page 16

BEFORE OPERATION
Grass Bag
A lawn mower works like a vacuum cleaner; it blows air through the
bag, which traps the grass clippings. Always empty the grass bag
before it becomes filled to the limit of its capacity. Bagging
performance will diminish after the bag becomes about 90% filled.
Also, the bag is easier to empty when it is not packed full.
Inspection
Inspect the grass bag for tears, holes, and excessive wear. The grass
bag wears during normal use and will eventually require replacement.
Grass bag replacement is explained on page 32.
Installation
1. Raise the discharge guard,
and remove the mulching
plug if it is installed. Hook the
grass bag onto the mower
deck as shown.
2. Release the discharge guard
to secure the grass bag.
Removal
1. Raise the discharge guard,
grasp the grass bag handle
and remove the grass bag.
2. Release the discharge guard.
3. When the grass bag is clear
of the discharge guard, you
can lift it through the
handlebar opening, or you
can remove it to the rear of
the mower below the
handlebar.
14
DISCHARGE GUARD
GRASS BAG
HANDLE
BAG