Installing Other Devices; Installing A Device In The 3.5-Inch Front Access Bay - Fujitsu DESKPOWER 5000 Series User Manual

6 Installing Other Devices

I Installing a device in the 3.5-inch front access bay
This section explains how to install a 3.5-inch front access bay option such as an internal 3.5-
inch hard disk drive or a magneto-optical disk drive in the 3.5-inch front access bay. Here is an
example of installing a magneto-optical disk drive.
1 Make a setting for the option to be installed.
Refer to the manual for the option and make a Master/Slave/Cable Select setting.
2 If brackets are attached to both sides of the internal option to be installed, remove the
brackets.
Remove the four screws to remove the brackets.
3 Remove the upper cover.
4 Remove the reinforcement brackets.
5 Remove the blank panel.
45