Lan Adapter Specifications - Fujitsu DESKPOWER 5000 Series User Manual

Point
Note that the specifications of this PC may be revised without notice.
I LAN adapter specifications
LAN controller
RAM for send/receive buffer
External interface
Transfer media
Transfer method
Access method
Data transfer speed
Wiring shape
Maximum segment length
Maximum number of nodes per segment
*1: To appropriately run the network at 100Mbps, use a category 5 or higher unshielded twisted pair (UTP) cable. Data may be lost
if a category 3 or 4 cable is used.
*2: The "hub unit" refers to a 100BASE-TX/BASE-T concentrator.
Point
The standard LAN of this PC automatically adapts to the speed of the connected network.
After the network speed is changed, due to the replacement of hub units or other reasons, be
sure to use a cable of an appropriate data grade for the speed.
Intel 82559
3KB each for sending and receiving
ISO8802-3 100BASE-TX/10BASE-T
*1
Twisted pair cable
(100Mbps: Category 5, 10Mbps: Categories 3 to 5)
Base band
CSMA/CD
100Mbps, 10Mbps
Star shape
100m
Depends on the hub unit
*2
61