Troubleshooting - bem wireless HL2508 User Manual

Operation Details (cont.)
Charging the speaker
When the Battery is less than 15%, a shot beep will comes out
from the Mini Mobile to signify the power is low.
Using supplied USB cable connect the Mini Mobile to a USB power
source, like USB ports on PC, USB charging port to charge, the
power indicator will lights up when it starts charging, and it will
goes off when it is fully charged.
Product Name : Mini Mobile
Model Number : HL2508
Output Power: 1.5W X 2
Frequency response: 100Hz-16000KHz
S/N ratio (A-W): 60 Db
Distortion:<10% THD (1KHz-6 dB Input)
Built-in rechargeable battery: 3.7V,320mAh
Bluetooth V2.1+EDR , profile Supported: A2DP, AVRCP
Working Range: Approximately 25ft, 8m
Working atmosphere: 0˚C-40˚C / 20%-90%RH
8

Troubleshooting

Issue: Pairing is unsuccessfully after multiple attempts
Solution:
• Check if the Bluetooth indicator light is on. If the indicator
light is off, please press the power button to turn the unit
on. If the Bluetooth indicator light still doesn't come on after
pressing the power button, please charge the unit.
• Check for other Bluetooth devices around the surroundings
that may interfere with searching and turn devices off.
• Power off and then power on the unit to restart the Bluetooth
Unplug any cables plugged into the AUX IN, restart all devices
and then attempt pairing again.
Issue: Interference or static during playback
Solution:
• Avoid using the device between concrete or other building
structures that may interfere with the signal.
• Please check if the battery level of the unit and the Bluetooth
device and charge if necessary.
For more troubleshooting help go to http://bemwireless.com
Storage
• Power off the Mini Mobile If the unit will not be used for an
extended period of time.
• Do not set the unit in a damp environment, high temperatures
or in direct sunlight.
9