Connecting A Component Video Source; Connecting An S-Video Source - Epson PowerLite Pro Z8000WUNL User Manual

Connecting the Projector to Your Equipment

Connecting a Component Video Source

Procedure
A
Connect one end of your cable (not included) to either the
projector's BNC ports or Computer port (depending on the
type of component video cable you're using). Connect the
other end of the cable to your equipment.
B
Turn the projector on (s p.29), select the image source
(s p.38), and adjust the image (s p.30).
Make sure the Input Signal setting in the Signal menu is set to Auto or
Component Video. s p.62

Connecting an S-Video Source

Procedure
A
Connect one end of your S-Video cable (not included) to the
projector's S-Video port, and the other end to the S-Video
connector on your equipment.
B
Turn the projector on (s p.29), select the image source
(s p.38), and adjust the image (s p.30).
27