Info Menu (Display Only) - Epson PowerLite Pro Z8000WUNL User Manual

List of Functions

Info Menu (Display Only)

Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image
signal being projected as shown in the following screen shots.
Analog RGB/Digital RGB/
Component Video/Digital Component Video
Sub Menu
Lamp Hours
Lamp Status
Source
Input Signal
Resolution
Video Signal
Refresh Rate
Sync Info
You can display the cumulative lamp operating time
When it reaches the lamp warning time, the characters are displayed in yellow.
The following icons show the status of the lamps.
: Lighted : Disable
When is displayed, the lamp is not operating normally. See "Reading the Indicators".
You can display the Source name for the connected equipment currently being projected.
You can display the Input Signal selected in the Signal menu.
You can display the Resolution.
You can display the Video Signal selected in the Signal menu.
You can display the Refresh Rate.
You can display the image signal Info.
This information may be needed if service is required.
Composite video/S-Video
Function
*
.
72