Removing And Attaching The Interface Cover; Removing; Attaching - Epson PowerLite Pro Z8000WUNL User Manual

Removing and Attaching the Interface Cover

Removing and Attaching the Interface Cover

Removing

1 Loosen the screw.
2 While pulling up the interface cover open switch, pull the
interface cover straight out.

Attaching

When you've finished connecting the projector to your equipment
(s p.24) and plugging the power cord into the projector (s p.29),
attach the interface cover as described below.
1 Remove the top of the interface cover.
2 Install the cover along the guide.
3 Tighten the screws.
23