Esc/Vp21 Commands; Command List - Epson PowerLite Pro Z8000WUNL User Manual

ESC/VP21 Commands

ESC/VP21 Commands

Command List

When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error
message is output and a ":" is returned.
Item
Power ON/OFF On
Off
Signal selection Computer
BNC
HDMI
DVI-D
Video
S-Video
Shutter On/Off On
Off
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
121
Command
PWR ON
PWR OFF
Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
Auto SOURCE BF
RGB SOURCE B1
Component SOURCE B4
SOURCE A0
SOURCE 30
SOURCE 45
SOURCE 42
MUTE ON
MUTE OFF