Kenmore 318205341A Use & Care Manual page 19

Setting the Oven Controls
Setting Convection Convert feature
The pad is used to automatically convert a standard Baking recipe for convection baking. When set properly, this
feature is designed to display the oven set converted (reduced) temperature in the display. Convection Convert MUST be
used with the Convection Bake keypad. Cook Time or Delay Start function may be added.
Using Convection Convert feature to adjust oven temperature
from a Bake recipe (example below when setting oven for
350°)
1. Arrange interior oven racks and place food in oven.
2. Press (Fig. 1). If a Cook Time or Delay Start is desired, enter
the times now.
3. Press . "CONV BAKE" and the oven temperature adjustment
will appear briefly in the display (for this example it is 325°F). A
beep will sound once the adjusted oven temperature is reached
(Fig. 2).
Note: When used with a Cook Time or a Delay Start setting, the
Convection Convert feature will display a "CF" for check food when
the bake time is 75% complete (Fig. 3). At this time the oven control
will sound 3 long beeps at regular intervals until baking has finished.
When the bake time has completely finished the control will display
"End" and will sound 3 long beeps every 30 seconds until the
pad is pressed (Fig. 4).
The oven icon will show a rotating fan within the square. This rotating
fan icon indicates when the Convection Fan is operating (see Figs 2 or
3).
Press to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection Convert
feature with a Cook Time or Delay Start function is 20 minutes.
INSTRUCTIONS PRESS
19
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4