Kenmore 318205341A Use & Care Manual page 22

Setting the Oven Controls
Using and Setting Meat Probe
To use the meat probe:
1. Prepare the food and properly insert the temperature probe into the food. DO NOT PREHEAT or start cooking before
properly inserting the meat probe. The probe should be inserted into the food and receptacle while the oven is still cool.
2. Place the prepared food on the desired oven rack position and slide into the oven.
3. Plug the meat probe into the probe receptacle located on the left front oven cavity side.
4. Close the oven door.
5. The oven control will detect if the meat probe is correctly plugged in and will illuminate with
6. The actual meat probe temperature will appear in the display.
7. To set the target temperature press
the numeric key pads (default setting is 170°F/77°C)*. Press
8. Set the oven control for
other baking features but not be set with Broil or Flex-Clean.
9. During the cooking process the actual meat probe temperature will be displayed.
10. If the target temperature needs to be changed during the cooking process, press
adjust the target temperature. Press the
* Se* Setting the oven to automatically stop cooking after reaching meat probe target temperature:
The oven leaves the factory preset to alert you when the internal target temperature has been reached and it continues with
the keep warm feature. You may desire to change how your oven reacts when using the meat probe.
Note: Changing how the meat probe reacts must be done before starting the cooking process.
1. To set oven to shut-off the baking function and continue in keep warm after reaching the Meat Probe target temperature
press and hold for 7 seconds then use the
2. Use the key to toggle back to ContInU and then press
after the meat probe reaches the target temperature.
pad once then enter the desired the desired target internal temperature using
, or and the desired oven temperature. You may use the meat probe with some
key to accept the change.
key toggle to the message CAnCEL then press
to accept the meat probe target temperature.
to accept if you wish for the oven to continue cooking
22
icon in the display.
and use the numeric keypads to
to accept.