To Call Back From Call Log (For Durafon Pro Only); Battery Recharge And Replacement - EnGenius DuraFon PRO User Manual

2. You need to subscribe the caller ID service from local telephone
company to retrieve this data.

To Call back from Call Log (For DuraFon PRO only)

1. When you review missed incoming call(s), you can directly call back by
pressing TALK Key.
2. The displayed CID number in most cases will be a 10-digit number with
the 3-digit area code followed by the 7-digit telephone number. If the
area code is unnecessary for calling back, you can follow below rule to
adjust the calling back number:
a. Press FORMAT
b. Press FORMAT
number.
c. Press FORMAT
number.
Re: The CID default is 10 digits, when press
7-digit 11-digit
3. After the displayed number chosen, press the

Battery Recharge and Replacement

1. Charge the battery when one or several of the following happen:
a. Phone beeps twice every two seconds.
b. Battery icon is empty.
c. Phone does not respond when a key is pressed.
d. LCD and backlighting become dim.
e. A decrease in coverage is experienced.
2. You can replace the handset battery after placing the call-in-progress
on hold.
3. Battery talk time and standby time vary depending on the talk/standby
pattern and the operating distance. Returning the handset back to the
charging cradle as often as possible is recommended for best
performance. Use only manufacturer provided battery and charger!
Basic Operations
key once, the 3-digit area code will be removed.
key twice, "1" will be added in front of the displayed
key three times, it will loop back original displayed
10-digit in circle.
40
FORMAT key, it will be
TALK key to call back.