Making A Broadcast - EnGenius DuraFon PRO User Manual

1. Press INTERCOM
2. Press END key to end the call.
3. During the call, press and hold the
active.
Notes:
1. Intercom calls can be made regardless if the Base Station is
present.
2. If a Group ID is entered, the first handset (belonging to that group)
that answer will establish a link with the caller. See Handset
Group Subscription.
3. If a link cannot be established, the LCD shows "No Connection"
after a 12-second time out.

Making a Broadcast

1. Broadcasting all handsets.
a. Press & hold BROADCAST
b. A series of beeps will indicate initiation of handset broadcast to all
handsets within communication coverage.
c. Begin speaking after the series of beeps has ended.
d. Release BROADCAST
2. Broadcasting a group of handsets.
a. Enter the Group ID and then press & hold
b. A series of beeps will indicate initiation of handset broadcast to all
handsets within communication coverage.
c. Begin speaking after the series of beeps has ended.
d. Release BROADCAST
3. Broadcasting an individual handset.
a. Enter the Handset ID and then press & hold
b. A series of beeps will indicate initiation of handset broadcast to all
handsets within communication coverage.
Re: When the handset is in use with a call or put a call on hold, it can't
be enabled with broadcast.
Basic Operations
key followed by a two-digit handset ID or Group ID.
TALK
key from one handset.
key to end the broadcasting.
key to end the broadcasting.
35
Key, the speakerphone is
BROADCAST key.
BROADCAST key.