Also it can transfer the same telephone call to other DuraWalkie or
PRO handset. (Details refer to call transfer)
Notes:
1. You can press
SILENT
call.
Unlike turning off the ringer (from the handset menu), the
key operation is valid only for the current call.
2. If Caller ID service is available, the LCD will display the incoming
call information. If the LCD shows "Private" or "Unknown" , the
caller's information may have been blocked by the caller or the
originating phone company.
Receiving an Intercom Call
1. When an intercom call arrives, the handset will ring or vibrate unless
the ringer has been turned off. Press
call.
2. If the handset is on the charger cradle (ringer will be temporarily
switched to "Ring" if it has been set to "Vibrate" ), lift the handset and
start the conversation.
3. If the handset is not on the cradle, press any key (except
SILENT
softkey) to answer.
4. During the call, press and hold the
active.
Notes:
1. The LCD displays the caller's Handset ID.
2. You can press the
turning off the ringer the
the current call.
Basic Operations
(Left softkey) if you choose to ignore the
TALK
TALK
SILENT
if you choose to ignore the call. Unlike
SILENT
key operation is valid only for
37
SILENT
key to answer the intercom
END
Key, the speakerphone is
and the