Front Panel Controls - moon 100 D Owner's Manual

MOON 100 D Digital-to-Analog Converter

Front Panel Controls

The front panel will look similar to Figure 1 (above). The "Standby" button is located in the lower left corner and toggles the
MOON 100 D between standby mode and operational mode. When in "Standby" mode, the 100 D's output signal is muted,
however, all digital and analog audio circuitry remains powered up to help maintain optimal performance. As well, the blue
LED on the 100 D will no longer be illuminated when the player is in "Standby" mode.
Directly above the "Standby" button is a vertical array of six (6) red LED's to indicate the sampling frequency of the digital
input signal: 192 kHz, 176.4 kHz, 96 kHz, 88.2 kHz, 48 kHz and 44.1kHz. Only when the MOON 100 D has successfully locked
onto an input signal will one of these LED's illuminate.
The "Input" button, located in the lower right corner, allows you to sequentially scroll through the three (3) different digital
inputs; each time you press the "Input" button, the 100 D scrolls to the next input. Directly above the "Input" button are
three (3) red LED's to indicate the selected input:
In the event that the 100 D cannot successfully lock onto the digital signal from the selected input, a sampling frequency LED
will not illuminate. This may be the result of i) no digital source component connected to the selected input ii) a faulty digital
audio cable between 100 D and your digital source component, your digital source iii) your digital source component not
being powered up or iv) your digital source component malfunctioning.
When you put the MOON 100 D into "Standby"mode, the currently selected input will remain the same when you put the unit
back into operational mode. However, when the power supply connection is interrupted, the 100 D will automatically default
to the "D1" input upon powering up.
____________________________________________________________________________________
Front Panel Controls
Figure 1: MOON 100 D Front panel
D1 .......USB
D2 .......S/PDIF
D3 .......TosLink
7