Rear Panel Connections - moon 380D Neo Series Owner's Manual

380D Digital-to-Analog Converter

Rear Panel Connections

Figure 2: MOON 380D Rear panel
The rear panel will look similar to Figure 2 (above). On the left side are two rows of analog outputs; The bottom row has two
pairs labeled "Right" and "Left", each with a single-ended RCA and balanced XLR connector. These are "Fixed Level" outputs,
intended to be connected to a line-level input on either your preamplifier or integrated amplifier. The top row also has two
pairs labeled "Right" and "Left", each with a single-ended RCA and balanced XLR connector. These are the OPTIONAL
"Variable Level" outputs, whereby the volume level can only be adjusted using the included remote control. These are meant
to be connected directly to your power amplifier's input; They can be also connected to a line-level input on either your
preamplifier or integrated amplifier. We strongly recommend that you use the balanced XLR connectors on your 380D to
maximize its level of performance. Don't hesitate to use high quality interconnect cables*. Poor quality interconnect cables
can degrade the overall sonic performance of your system.
There is one "Digital SPDIF Output" on an RCA connector, immediately followed by the SPDIF digital "Monitor Loop" with one
input and one output, both on RCA connectors. Next is a group of eight (8) "Digital Inputs" labelled "D1" thru "D8". Inputs
"D1" and "D2" are AES/EBU on 3-pin XLR connectors and they benefit most from cables with an impedance of 110Ω. Inputs
"D3", "D4" and "D5" are S/PDIF – the first two on RCA connectors and the third on a BNC connector, benefitting most from
cables with an impedance of 75Ω. Inputs "D6" and "D7" are Optical and use a Toslink connector. Finally, input "D8" is USB
type-B connector. Don't hesitate to use high quality digital interconnect cables*.
optional "
The space directly above the row of digital inputs is reserved for the MiND" Music Streamer. If your MOON 380D is
equipped with the "MiND" option, you will see a socket for a WiFi antenna and a RJ45 ethernet connector socket. Please
consult the "MiND Setup Guide" and "MiND User Guide" for further details.
The upper right side of the rear panel has various connectors for external communications. The MOON 380D is equipped
with full-function bi-directional RS-232 port control and status for custom integration or automation, as well as future software
updates. Next to the RS-232 port are two (2) "SimLink™" connectors labeled "in" and "out" on 1/8" mini jacks. Please refer to
the next section entitled SimLink™ for more details. Then there is a 1/8" mini-jack input for use with aftermarket infrared
remote control receivers. Finally, there's a 12V trigger output on a 1/8" mini-jack.
Finally on the far right side is the main power switch ("0"=off, "1"=on), the IEC receptacle, labeled "AC Input" for the
included AC power cord, and the "AC Fuse" socket cover. Connect the supplied AC power cable to the IEC receptacle. Ensure
that the AC wall outlet you use has a functioning ground. For the best sonic performance, it is preferable that you plug your
380D directly into a dedicated AC outlet and avoid using an extension cord. If you have the time and willingness, consider
installing a superior quality AC wall outlet such as a hospital grade Hubbell*.
* Please speak with your MOON Authorized Retailer about the benefits of high quality cables for your system, and
superior quality AC wall outlet .
____________________________________________________________________________________
8