Oil Filter Change - Honda GCV520 Owner's Manual

SERVICING YOUR ENGINE

OIL FILTER CHANGE

1. Drain the engine oil, and retighten the drain bolt securely (see page
23).
2. Remove the oil filter with oil filter wrench, and drain the remaining
oil into a suitable container. Discard the used oil filter.
Use an oil filter wrench, rather than a strap wrench, to avoid striking
and damaging the oil filter.
OIL FILTER WRENCH
3. Clean the filter mounting base, and coat the seal of the new oil filter
with clean engine oil.
Use only a genuine Honda oil filter or a filter of equivalent quality
specified for your model. Using the wrong filter, or a non-Honda
filter which is not of equivalent quality, may cause engine damage.
24
FILTER MOUNTING BASE
OIL FILTER
SEAL