Oil Filter Change - Honda GX610 Owner's Manual

OIL FILTER CHANGE
1. Drain the engine oil, and retighten the drain bolt securely (see page 26).
2. Remove the oil filter, and drain the oil into a suitable container. Discard the
used oil filter.
1 NOTICE 1
Use an oil filter socket tool, rather than a strap wrench, to avoid striking and
damaging the oil pressure switch.
SEAL
LTER SOCKET TOOL
3. Clean the filter mounting base, and coat the seal of the new oil filter with
clean engine oil.
1 NOTICE )
Use only a genuine Honda oil filter or a filter of equivalent quality specified
for your model. Using the wrong filter, or a non-Honda filter which is not of
equivalent quality, may cause engine damage.
27