Troubleshooting - Honda HP400 Owner's Manual

Power carrier
Hide thumbs Also See for HP400:
Table of Contents

Advertisement

11. TROUBLESHOOTING
To assure
maximum
service
life from your carrier, don't disassemble
it
unnecessarily.
If the following basic troubleshooting
does not get you and your
carrier back to work, it is time to consult your authorized
Honda dealer.
Check the following points if the engine does not start.
l
Is there sufficient fuel?
l
Is there sufficient engine oil?
l
Is there a spark at the spark plug?
a. Remove the spark plug cap. Clean any dust from around the spark plug
base, then remove the spark plug.
b. Install the spark plug in the plug cap.
c. Turn the engine switch on.
d. Grounding
the side electrode
to any engine ground, pull the recoil
starter to see if sparks jump across the gap.
v
If any fuel is spilled, make sure the area is dry before
I
-
.
testing the spark plug or starting the engine. Spilled fuel or fuel vapor
may ignite.
l
Have you followed the starting method as described on pagel4?
Check the following
if the engine
runs but the carrier does not operate
properly:
l
Is the drive clutch cable adjusted (page 35)?
l
Are the steering clutch cables adjusted (page 38)?
l
Is the brake cable properly adjusted (page 36)?
l
Are the tracks adjusted to proper tautness (page 34)?
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents