Compass Calibration; Compass Operation - Honda 2010 Pilot Owner's Manual

Except Touring models

Compass Operation

Compass operation can be affected
by driving near power lines or
stations, across bridges, through
tunnels, over railroad crossings, past
large vehicles, or driving near large
objects that can cause a magnetic
disturbance. It can also be affected
by accessories such as antennas and
roof racks that are mounted by
magnets.
If the compass display is blinking
and the CAL indicator is shown, the
compass is self-calibrating.

Compass Calibration

COMPASS
The compass may need to be
manually calibrated after exposure to
a strong magnetic field. If the
compass seems to be continually
showing the wrong direction and is
not self-calibrating, or the compass
display is blinking with the CAL
indicator on, do the following.
1. Turn the ignition switch to the ON
(II) position.
2010 Pilot
Compass
COMPASS SETTING MENU ITEMS
2. On EX and EX-L models
Press and hold the MENU button
for about 5 seconds until you hear
a beep. The display shows you the
compass setting menu items.
On LX models
Press and hold the RPT button
and TUNE/SOUND knob for
about 2 seconds until you hear a
beep. The display shows you the
compass setting menu items.
CONTINUED
353