Honda 2010 Pilot Owner's Manual page 448

Towing a Trailer
We recommend that you have your
dealer install a Honda wiring harness
and converter. This harness has
been designed for your vehicle.
If you use a non-Honda trailer
lighting harness and converter, you
can get the connector and pins that
mate with the connector in your
vehicle from your dealer.
Since lighting and wiring vary with
trailer type and brand, you should
also have a qualified mechanic install
a suitable connector between the
vehicle and the trailer.
444
Towing Equipment
7-PIN TRAILER CONNECTOR
TRAILER HITCH
Your vehicle has a class 3 trailer
hitch as standard equipment.
The jumper harness and trailer
brake fuse are stored in the glove
box.
Also see page 441 for trailer-related
information.
2010 Pilot
Connecting the Trailer Connectors
On Touring models
LID
SOCKET
7-PIN TRAILER
CONNECTOR
7-PIN TRAILER CONNECTOR
The 7-pin trailer connector is needed
for the trailer lights. To connect the
connector, do this:
1. Make sure the connector and the
socket are free of dirt, moisture,
or other foreign material.
Open the socket lid by pulling it up.
2.
RETAINING
TAB
RETAINING
TAB