Honda 2010 Pilot Owner's Manual page 109

Adjust Outside Temp. Display
If you sometimes find that the
temperature reading is a few
degrees above or below the actual
temperature, you can adjust it by
following these instructions:
You can choose this item to
customize from ''METER SETUP''
by pressing the INFO ( / ) button
▲ ▼
repeatedly.
U.S.
Canada
Adjust the outside temperature value
by pressing the INFO ( / ) button
▲ ▼
repeatedly. Press the SEL/RESET
button to set the desired value.
2010 Pilot
Multi-Information Display
U.S.
Canada
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ''SETTING INCOMPLETE''
message appears, go back to
''ADJUST OUTSIDE TEMP.
DISPLAY'' and repeat the procedure
again.
CONTINUED
105