Honda 2010 Pilot Owner's Manual page 178

Driving Position Memory System
To cancel the storing procedure
after pressing the SET button, do
any of the following:
Fail to press a memory button
within 5 seconds.
Pressing the SET button again
within 5 seconds.
Readjust the seat position.
Readjusting the outside mirror
position.
174
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
All stored driving positions will be
lost if your vehicle's battery goes
dead or is disconnected.
2010 Pilot
Selecting a Memorized Position
To select a memorized position, do
this:
Make sure the shift lever is in the
1.
Park (P) position.
2. Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
The system will move the seat and
outside mirrors to the memorized
positions. The indicator in the
selected memory button will flash
during movement. When the
adjustments are complete, you will
hear two beeps, and the indicator will
remain on.