Compass; Compass Calibration - Honda CR-V Owner's Manual

Compass

When you turn the ignition switch to ON
compass display appears.

Compass Calibration

If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
Compass Setting Menu Items
w , the compass self-calibrates, and the
(
1. Turn the ignition switch to ON
2. Press and hold the SETUP button until the
display shows the compass setting menu.
3. Rotate to select Calibration, then press
.
4. When the display changes to Calibration
Start, press .
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
1Compass
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
( w .
are mounted by magnets
1Compass Calibration
Calibrate the compass in an open area.
While setting the compass:
•
The
•
The SETUP button cancels the setting mode.
button returns to the previous screen.
223