Table of Contents
Advertisement
User Manual
Operation
KVM Switch Detection – First Time Operation
After connecting the KVM Switch for the first time each computer will automatically detect the
switch and the keyboard and mouse that are connected to it. During this process, please do
not try and switch between computers
There are three methods of controlling this KVM Switch:
Push button
Hotkeys
KVM Switcher software
Hotkey and software switching is supported by Windows PCs only; Mac users must use the
push button to switch ports.
Note: You can only switch to a port if a computer is connected to it and powered on!
Each time you switch between computers, there will be a very brief delay as the computer
detects the keyboard and mouse connected to the KVM switch. This process is indicated by the
port LED flashing. The LED produces a solid glow when the port is fully active and keyboard /
mouse control is enabled.
The Port LED flashes during
keyboard & mouse detection
3
English
Advertisement
Table of Contents
