Honda 2010 Accord Sedan Owner's Manual page 88

To program the Ignition Switch
Unlock mode:
Unlocks the driver's door or all doors
when the ignition switch is moved out of
the ON (II) position.
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. On A/T vehicles, push and hold the
brake pedal, then move the shift
lever out of the Park (P) position.
4. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold the switch:
Until you hear another click
(after about 5 seconds) to
activate
driver's door unlock
feature.
Or, until you hear two more
clicks (after about 10 seconds)
to activate all doors unlock feature.
2010 Accord Sedan
Door Locks
5. Release the switch, and within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
move the shift
On A/T vehicles,
lever to the Park (P) position.
6. Turn the ignition switch to the
LOCK (0) position.
Even if your vehicle's battery is
removed or goes dead, the system
keeps the auto door lock/unlock
setting which you selected.
85