Honda 2010 Accord Sedan Owner's Manual page 331

Lights
6. Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
7. Push the electrical connector onto
the bulb.
8. Turn on the headlights to test the
new bulb.
9. Put the inner fender cover in place.
Install the two holding clips. Lock
each one in place by pushing on
the center.
328
Replacing a Front Turn Signal/
Parking Light Bulb
V6 model is shown.
1. Open the hood.
To change the turn signal bulb on
the passenger's side, remove the
engine coolant reserve tank by
pulling it out of its stay.
2010 Accord Sedan
STAY
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
3. To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
BULB