Honda 2010 Accord Sedan Owner's Manual page 181

Playing the FM/AM Radio (Models with navigation system)
2. Use the tune, skip (seek), scan, or
RDS function to tune the radio to a
desired station.
Press the preset button, and hold
3.
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it for more than 2 seconds.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
178
A.SEL INDICATOR
PRESET ICON
A.SEL ICON
AUTO SELECT − If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Push the interface selector down to
scroll down the screen, highlight
A.SEL, then press ENTER on the
interface selector. You will see
A.SEL on the screen, and the system
goes into scan mode for several
seconds.
2010 Accord Sedan
press ENTER
To turn off auto select,
on the interface selector.
You can also press the A.SEL side of
the SCAN/A.SEL bar. You will see
A.SEL on the screen, and the system
goes into scan mode for several
seconds. The system stores the
frequencies of six AM and twelve
FM stations in the preset buttons.
You will see ''0'' displayed if auto
select cannot find a strong station for
every preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.